Contact

Address

Contact Information

3 Bedford Grove
Tinshill
Leeds
United Kingdom
LS16 6DT

Phone

Tel: 0113 2160 869
Mob: 07931 473 974

Contact us Feel free to send us your questions.

All experienced property owners know that they must keep their property in tip-top condition if they are to attract tenants, and/or achieve maximum profits upon liquidating their investment. Thorough and regular property inspections should be undertaken to ensure that this is the case.

Inspections should be performed personally or via a trusted third party to make certain that the property looks clean, is well maintained and is safe for all occupants to use. Preventative maintenance is essential in this respect as it helps to catch small defects before they escalate into expensive problems.

When carrying out a preventative maintenance inspection, the inspector should take into account everything from the gardens and exterior structure of the property, to making sure that all appliances work safely and that light bulbs are replaced every few months.

If unsatisfactory areas are found, the inspector should be empowered to take action to remedy the situation, no matter how innocuous the problem may seem. A loose roof tile, for instance, may seem too insignificant to take action over.

However, should a freak storm blow in during the winter, that tile could be blown off the roof, allowing rainwater to seep through and damage the ceiling and walls. Replacing the tile will cost very little — replacing and redecorating damaged ceilings and wall coverings is likely to be a lot more expensive!

Here is a short checklist of other areas to take into account during an inspection:

  1. Garden – Check perimeter fencing or walls for damage. See if trees need to be trimmed and make sure the garden is in a generally good condition.
  2. Exterior Walls – Check for cracks, paint damage and damage caused by climbing plants or nearby trees.
  3. Roof – Check for loose or missing tiles Guttering- holes and leaks.
  4. Windows & doors – Check for chips or cracks, rotten frames and water leaks locks and fastenings.
  5. Interior appliances – Check that all appliances are working safely.
  6. Smoke Detectors – Check that they are working properly.
  7. Fire extinguishers – Check that they are working properly.
  8. Interior Walls – Check for signs of water damage.
  9. Kitchen and bathrooms for seals and leaks.